Germocid Polvere
Disinfectant and sterilizing of surgical instruments with Paracetic Acid.
Germocid Polvere is a Medical Device CE 0546 class IIb in compliance with Directive 93/42/ECC.
GERMOCID POLVERE can be used as a decontaminant, disinfectant, sporicidal, cold sterilizer of invasive medical devices in hospitals, medical and dental surgeries like endoscopes, optical fibers, transducers, washing machine for endoscopes.
Its formulation based on Sodium Percarbonate and Tetraacetyleth ylenediamine is activated after dissolving the dose of use in warm water; the blue liquid obtained will be transparent in fifteen minutes, time necessary to develop the active ingredient (Peracetic acid). The powder, once dissolved, leaves no residue on the bottom and has no surface foam.
The solution can be disposed of as non hazardous waste. Peracetic acid, formed by the reaction between Sodium Percarbonate and Tetraacetylethylenediamine, even with the interference of organic elements (e.g. biological exudates), acts with a wide range of action towards pathogenic microorganisms such as bacteria, fungi, mycobacteria, viruses and spores.
- COMPOSITION
- INSTRUCTIONS FOR USE
- PACKAGING
- Product ID
- HOW TO STORAGE AND VALIDITY
- Technical DataSheet
100,0 g of product contain:
Tetracethylethylenediamine 25,0 g; Sodium percarbonate 42,0 g; coformulants q.s. to 100,0 g.
• Preparation of the solution by immersion:
– prepare the quantity of warm water required in the special tank, checking that the temperature is around 35 ° C: warm water helps dissolve the powder.
– pour the necessary dose per liter of water according to the wanted activity.
– mix the solution until a clear blue colored solution is obtained.
– wait 15 minutes before using the solution.
• Decontamination / Disinfection:
– use 8 g per liter of water, immerse the instruments in the solution for 10 minutes.
– in case of persistence of organic residue, proceed washing the instruments using an appropriate detergent.
– for the activity described, the solution remains active for a maximum time of 7 days from the preparation (depending on the quantity of instruments treated).
• Sporicidal activity:
– use 8 g per liter of water, immerse the instruments in the solution for 10 minutes
– for the activity described, the solution remains active for a maximum time of 24 hours from preparation.
• High level disinfection / cold sterilization:
– use 16 g per liter of water, immerse the instruments in the solution for 10 minutes.
– after the contact time, remove the instruments and rinse with sterile water.
– dry and store aseptically
– for the activity described, the solution remains active for a maximum time of 24 hours fro m
preparation.
• For the activity described, the solution remains active for a maximum of 24 hours from preparation.
Carefully read the instructions and directions for use on the label.
Jar of 500 g – Box containing 2 Jars
Sachets of 16 g – Box containing 50 Sachets
B750 (500 ml)
B500 (16 g sachets)
2 years.
The indicated period of validity refers to the product properly stored in its container and correctly used.
Store in a cool, dry place, away from heat sources.
